AUDIOLINE DECT4500 Operations Instructions download pdf (Page 67)

- Private exchanges /T-NET -

7 Private exchanges/T-NET

You can use the "R" signal button on your telephone on private exchanges and

when using DEUTSCHE TELEKOM's T-Net functions.

7.1 "R" Button on private exchanges

If you have connected your telephone to a private exchange, you can use all the

facilities such as call transfer, automatic recall, etc. The "R" signal button gives you

access to these facilities. The FLASH time "100ms" will be required on a private

exchange (Adjustment, see 8.7). You can find out from the dealer from whom the

equipment was purchased whether your telephone will work on your private

exchange without any problems.

7.2 "R" Button and the DEUTSCHE TELEKOM T-Net

Your telephone supports the most important DEUTSCHE TELEKOM added value

functions (e.g. brokering, call waiting, three-way conference, etc.). The T-Net works

using the "FLASH 300ms" setting. (Adjustment, see 8.7). Please contact

DEUTSCHE TELEKOM to gain access to T-Net functions.

7.3 Inserting an automatic pause

With some private exchanges, it is necessary to dial a certain number (e.g. "9" or

"0") in order, after a short pause, to obtain a dialling tone for an outside line on the

extension.

An automatic dialling pause of ca. 3 seconds can be incorporated into the number.

When entering the number, hold the

button pressed at the required point until

the d indicator appears in the display. Then enter the remaining digits of the phone

number. You can, of course, also store this pause with numbers in the phone book.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

No comments

AUDIOLINE DECT4500 Operations Instructions Page 67